manualshive.com logo in svg

Fujitsu AGHG09KVCA, Manual, Page: 126 / 403

Share
Download
Fujitsu AGHG09KVCA Manual Download Page 126

Exterior

Part name

Model name

Summary

Simple remote

controller

UTY-RSNGM

Compact remote controller
concentrates on the basic functions
such as Start/Stop, fan control,
temperature setting, and operation
mode.
Wire type: Polar 3-wire

IR receiver kit

with wireless

remote

controller

UTY-LBTGM

Unit control is performed by wireless
remote controller.

Wireless remote

controller

UTY-LNTG

Unit control is performed by wireless
remote controller.

NOTES:

• Available functions may differ by the remote controller. For details, refer to the operation manu-

al.

• When using the group controlling system of the wired remote controller, using Wireless LAN

adapter is prohibited.

6-1. Indoor unit

- (02-82) -

6. Optional parts 

TECHNICAL DATA

AND PARTS LIST

TECHNICAL DATA

AND PARTS LIST

Summary of Contents for AGHG09KVCA




















































































































































































































































































































































































































Reviews:

No comments