Fujitsu 80, Scsi Logical Interface Specifications

Page: 262 / 310

Sense Data Error Recovery Methods
5-6 C141-C010
Table 5.2 Additional sense code and additional sense code qualifier (1 of 6)
C* Q* Name Explanation
Sense
key
00 No additional sense
information
No specific additional sense code exists. 0 00
06 I/O process terminated I/O was interrupted by the Terminated I/O Process message. 0
01 00 No index/sector signal The target sector was not detected by the sector counter within the
specified time. 4
00 Peripheral device write
fault
A write operation to the disk media was terminated abnormally.
• Off track during write. 1, 3, B
80 Peripheral device write
fault
A write operation to the disk media was terminated abnormally.
• Write current abnormality 1, 4, B
82 Peripheral device write
fault
A write operation to the disk media was terminated abnormally.
• Servo mark not found during write. 1, 3, B
83 Peripheral device write
fault
A write operation to the disk media was terminated abnormally.
• Servo cell detected was detected during write.
• Write gate and sector pulse were activated at the same time
during write. 1, 4, B
03
87 Peripheral device write
fault
A write operation to the disk media was terminated abnormally.
• No write gate detected 1, 4, B
01 Logical unit in process of
becoming ready
Disk drive is getting ready.
(The spindle motor is not at its regular rotation speed or has reached
its regular rotation speed but is still reading the information) 2
02 Logical unit not ready Disk drive is in start command waiting state.
(initializing command required) 2
04 Logical unit not ready,
format in progress
The drive cannot be accessed since it is being formatted. 2
09 Logical unit not ready,
Self-Test in progress
The drive cannot be accessed since it is being Self-Test. 2
04
F0 Microcode Revision ady,
UNMATCH
(Counterfeit Detected)
The drive detected the Firmware Revision Unmatch between SA
Area and F-ROM. 2
0B 01 Specified temperature
exceeded
Temperature exceeded established value. 0, 1, 6
01 Write error recovered with
auto reallocation
A write error was recovered with auto reallocation. 1
02 Write error – auto
reallocation failed
Write auto reallocation or the write that was applied to auto
reallocation was failed. 3
0C
03 Write Error Unrecovered Write Offtrack Error
• Write retries are exhausted in case of AWRE = 0 3
80 Write Error
• Unrecovered Write
Offtrack Error
Reported if a write offtrack occurred during the Format unit
command execution. 3
81 Write Error Recovered Write Error Recovered With Servo Auto Reallocation. 1
* C: Additional Sense Code, Q: Additional Sense Code Qualifier