Fujitsu Siemens Computers CentricStor V3.1D, User Manual

Page: 276 / 640

276
U41117-J-Z125-7-76
History data Global Status
Meaning of the columns:
The job data (result for ... :) is output separately for each LVG.
pos Serial number
LVG Name of the logical volume group
PVG 1 Name of the first assigned physical volume group
If '======' is specified as the name, no PVG is assigned to the LVG.
PVG 2 Name of the second assigned physical volume group
If '======' is specified as the name, only a single save is performed for the
LVG (no Dual Copy).
pending jobs Number of jobs which have been accepted for this LVG
lv-size Size of the logical volumes:
STD
Standard = 900 MB
EXT_x Extended: x specifies the volume size in GB (2, 5, 10, 20, 50,
100 or 200)
7.6.2.10 Statistics » Physical Components
The following submenus are available:
– Physical Drives (see below)
– Physical Volumes (page 279)
– Physical Volume Groups (page 283)
– Jobs of Physical Vol. Groups (page 289)
– Reorganization Status (page 291)
Notes on the refresh function:
All statistics functions support the refresh function:
After the function has been executed, i.e. after the result has been displayed in the
text window, the dialog window with the selection criteria (function window) is reta-
ined for further searches. The “OK” button at the lower edge of the function window
is replaced by the “Refresh” button, which enables the search to be repeated. The
search criteria can be modified before another search takes place.
The previous text window is then used to display the result, in which case the pre-
vious contents are deleted. The function window is closed only when the user clicks
on the “Cancel” button. In this case the text window with the result is also closed
implicitly.
i