Fujitsu Siemens Computers CentricStor V3.1D User Manual Download Page 213

Page: 213 / 640

U41117-J-Z125-7-76

213

GXCC

Function bar

After the function has been completed, a message box with an OK button appears:

When you click “OK”, the entry form and the message box disappear.

6.2.9.10

Logical Volume Operations » Erase Logical Volumes

This function is not available in Observe mode.

This function enables logical volumes to be removed from the library and their contents to
be deleted.

Make sure that the volumes to be erased have been released from the pool

managed by the host(s).

The conventions described in the section

“Logical Volume Operations » Add Logical

Volumes” on page 211

apply for specifying the VSNs and number of volumes. Wildcards

are not permitted in the entry. The volume group does not need to be specified because all
volume names are unique throughout the entire CentricStor.

Buttons along the bottom border

The delete operation is started.

Cancel

The window is closed without any further activity.

2230 logical volume(s) added

Summary of Contents for CentricStor V3.1D

































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CentricStor V3.1D

Reviews:

Related manuals for CentricStor V3.1D

Brands by name

Popular brands

Fujitsu Siemens Computers CentricStor V3.1D, User Manual

Search results

Summary of Contents for CentricStor V3.1D

Reviews:

Related manuals for CentricStor V3.1D

Brands by name

Popular brands