Fujitsu Siemens Computers CentricStor V3.1D User Manual Download Page 269

Page: 269 / 640

U41117-J-Z125-7-76

269

Global Status

History data

The list of logical drives is output in a text window after you click on the “OK” or “Refresh”
button:

The following information is output:

VSN

VSN of the volume mounted in a drive or “Empty”

GRP

LVG of a mounted volume or -

C-ID

Number of the cache (=Cache-ID) to which the mounted volume is assigned or -

SIZE

Size of the data contained in the volume or -

ACCESS TIME

Timestamp of the last access or -

STATE

Faulty

The logical volume is faulty. It can no longer be used.

Home

The logical volume is currently not being used.

Mounted

The logical volume has been inserted in a logical drive.

Mount Pending

The logical volume has just been inserted in a virtual tape drive.
There is still no confirmation for this.

Mnt. Queued

A mount request for the logical volume was queued by the VLM due
to a lack of resources.

Restoring

The logical volume is just being read in by the physical volume.

Summary of Contents for CentricStor V3.1D

































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CentricStor V3.1D

Reviews:

Related manuals for CentricStor V3.1D

Brands by name

Popular brands

Fujitsu Siemens Computers CentricStor V3.1D, User Manual

Search results

Summary of Contents for CentricStor V3.1D

Reviews:

Related manuals for CentricStor V3.1D

Brands by name

Popular brands