FujiFilm SonoSite SII, User Manual Supplement

Page: 17 / 476

En
glish
De
utsch
Español
Fr
a
n
ça
is
It
a
lia
n
o
Po
rt
u
g
u
ê
s
Imaging 15
English
De
ut
sch
Español
Fr
a
n
ç
a
is
Ita
lia
no
P
o
rtuguês
Nederlands
ECG
ECG is an option and requires a FUJIFILM SonoSite ECG cable.
To use the ECG
1 Connect the ECG cable to the ECG connector on the back of the ultrasound system. ECG turns on
automatically if the system is in live imaging mode.
2 Tap the ECG control at the bottom of the touchscreen.
The ECG controls appear on the screen.
3 Adjust controls as desired.
ECG controls
WARNINGS

Do not use the SonoSite ECG to diagnose cardiac arrhythmias or to provide
long-term cardiac monitoring.

To avoid electrical interference with aircraft systems, do not use the ECG cable
on aircraft. Such interference may have safety consequences.
Caution

Use only accessories recommended by FUJIFILM SonoSite with the system.
Connecting an accessory not recommended by FUJIFILM SonoSite can damage
the system.
Note The ECG signal may take up to one minute to restabilize after defibrillator use on
the patient.
Table 5: ECG on
-
screen controls
Control Description
Show/Delay/
Hide
Turns on and off ECG signal with and without the Delay line.
ECG Gain
Tap the ECG gain control , and then tap the up or down arrows to increase or
decrease the ECG Gain from 0-20.
Position Press the right knob to select Position , and then turn the knob to set the position of
the ECG signal.
Sweep Speed Settings are Slow , Med , and Fast .