FujiFilm FinePix F11, Owner'S Manual

Page: 58 / 67

115 114
Notes on the xD-Picture Card™
■
Image Memory Card
h T h i s I m a g e M e m o r y C a r d i s a n e w i m a g e
recording media (
xD-Picture Card ) developed for
digital cameras. The Image Memory Card consists
of a semiconductor memory (NAND-type flash
memory) to record digital image data.
The recording process is electrically performed
and enables erasure of existing image data as well
as re-recording of new image data.
h When using a new Memory Card, or a Memory
Card that has been formatted by a PC, be sure to
format the card with your digital camera before
using it.
■
Protecting Your Data
h Images and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
h Save your important data to another media (i.e., MO
disk, CD-R, hard disk, etc.).
■
Handling xD-Picture Card
h When storing xD-Picture Card s, make sure that
they are kept out of the reach of children. An xD-
Picture Card could be swallowed cause suffocation.
If a child swallows an xD-Picture Card , seek
medical attention or call emergency number right
away.
h When inserting the xD-Picture Card into the
camera, hold the xD-Picture Card straight as you
push it in.
h Do not expose an xD-Picture Card to shock. Do not
apply pressure, and avoid bending.
h Do not use or store xD-Picture Card in hot and
humid places.
h Clean the xD-Picture Card with a soft dry piece of
cloth when dirty.
h When carrying or storing an xD-Picture Card , keep
it in the special protective case.
h The xD-Picture Card will work well for long time, but
will sooner or later lose its ability to store and play
back images or movies. If this happens replace it
with a new
xD-Picture Card .
h Never remove the xD-Picture Card or turn the
camera off during data recording or erasing ( xD-
Picture Card formatting) as this could be damaged
to the xD-Picture Card .
h The use of xD-Picture Card s is recommended with
FinePix F11.
The recording quality cannot be guaranteed when
xD-Picture Card s other than those manufactured by
FUJIFILM are used.
h The xD-Picture Card may feel warm when it is
removed from the camera after taking pictures. This
is normal.
h Do not put labels on the xD-Picture Card . Peeling
labels can cause the camera not to work properly.
■
Using xD-Picture Card with a PC
h When taking pictures using an xD-Picture Card that
has been used on a PC, reformat the xD-Picture
Card using your camera for best quality.
h When formatting an xD-Picture Card , a directory
(folder) is created. Image data is then recorded in
this directory.
h Do not change or delete the directory (folder) or file
names on the
xD-Picture Card because this will
make it impossible to use the xD-Picture Card in
your camera.
h Always use the camera to erase image data on an
xD-Picture Card .
h To edit image data, copy the image data to the PC
and edit the copy.
■
Specifications
Type Image memory card for digital
cameras (
xD-Picture Card )
Memory type NAND-type flash memory
Conditions for use Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions 25 mm
×
20 mm
×
2.2 mm
(0.98 in.
×
0.79 in.
×
0.09 in.)
(W
×
H
×
D)
■
Handling the Battery
To avoid injury or damage, observe the
following:
h
Do not carry or store battery with metal objects such
as necklaces or hairpins.
h
Do not heat the battery or throw it into a fire.
h Do not attempt to take apart or change the battery.
h
Do not recharge the battery with chargers other
those specified.
h
Dispose of used battery promptly.
To avoid damaging the battery or shortening
its life, observe the following:
h Do not drop the battery or otherwise subject it to
strong impacts.
h Do not expose the battery to water.
To make sure that you obtain optimum battery
performance, observe the following:
h Always keep the battery terminals clean.
h
Do not store battery in warm or humid places.
Storing the battery for long periods in a hot location
can shorten the battery life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This
is normal. Use the AC power adapter supplied with
the camera if you are taking pictures or viewing
images for a long period of time.
■
Specifications of the included NP-120
Nominal voltage DC 3.6V
Nominal capacity 1950 mAh
Operating temperature 0°C to +40°C (+32°F to +104°F)
Dimensions
35 mm
×
53 mm
×
11 mm
(1.4 in.
×
2.1 in.
×
0.4 in.)
(W
×
H
×
D)
Mass (Weight) Approx. 44 g (1.6 oz.)
Notes on the Power Supply
h The NP-120 may feel warm after it has been charged
or immediately after being used. This is perfectly
normal.
h
Do not recharge a fully charged NP-120.
■
Battery Life
At normal temperatures, the NP-120 can be used at
least 300 times.
If the time for which the NP-120 provides power
shortens markedly, this indicates that the NP-120 has
reached the end of its effective life and should be
replaced.
The Rechargeable Lithium-ion Battery NP-120 is both
compact and capable of storing large quantities of
power. However, if it is stored for long periods while
charged, the performance of the battery can be
impaired.
h If the battery will not be used for some time, run the
battery out before storing it.
h If you do not intend to use the camera for a long
period of time, remove the battery from the camera.
h Place the battery pack inside the soft case and store
in a cool place.
✽
The battery should be stored in a dry location with an
ambient temperature b15°C and +25°C
(+59°F and +77°F).
✽
Do not leave the battery in hot or extremely cold
places.
Always use the AC Power Adapter AC-5VW with the
camera. The use of an AC Power adapter other than
AC-5VW can be damaged to your digital camera.
h Use the AC Power Adapter for indoor use only.
h Plug the connection cord plug securely into the DC
input terminal of the FUJIFILM Digital camera.
h Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out
the plug gently. Do not pull on the cord.
h Do not use the AC power adapter with any device
other than your camera.
h During use, the AC power adapter will become hot
to the touch. This is normal.
h Do not take apart the AC power adapter. Doing so
could be dangerous.
h Do not use the AC power adapter in a hot and
humid place.
h Do not subject the AC power adapter to strong
shocks.
h The AC power adapter may emit a humming. This is
normal.
h If used near a radio, the AC power adapter may
cause static. If this happens, move the camera away
from the radio.
✽
Very occasionally, DC output will be prevented by
the operation of the internal protection circuit. In this
event, unplug the AC power adapter AC-5VW from
the power socket for a few moments and then plug it
in again. This will restore DC output.
■
Specifications (AC-5VW)
Power Supply AC 100V to 240V,50/60Hz
Rated Input Capacity 13W(U.S.A.and Canada)
0.08A to 0.2A(other countries)
Rated Output DC 5.0V 1.5A
Temperature During Use 0°C to +40°C (+32°F to +104°F)
Dimensions (MAX.) 40 mm
×
21 mm
×
79 mm
(1.6 in.
×
0.8 in.
×
3.1 in.)
(W
×
H
×
D)
Mass (Weight) Approx. 110 g (3.9 oz.)
(excluding power cord)
AC Power Adapter
Notes on storage