3 Copy
78
Co
py
3
Output Format
On the [Output Format] screen, you can configure features for outputting documents.
The following shows the reference section for each feature.
1
On the [All Services] screen, select
[Copy].
2
Select the [Output Format] tab, and
then select a feature on the [Output
Format] screen.
Copy Output (Outputting by Specifying Finishing)
You can specify the copy output method.
Note
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
If the offset stacking module is installed, the output position of copies is offset
alternately to distinguish each set of copies.
If the finisher is installed, each set of copies can be stapled or punched, and then
output.
The output destination is automatically selected depending on the selected feature.
Documents are delivered on the output tray when [Auto] is selected, or on the finisher
tray when [Collated/Stapling/Punching] or [Uncollated] is selected. For the machine
