background image

Output Format

85

Co
py

3

Multiple-Up (Copying Multiple Sheets onto One Sheet)

2, 4, or 8 pages of a document can be copied together onto a single sheet of paper.

When you select [Multiple-Up], [Auto %] of [Reduce/Enlarge] is selected automatically. 
The machine automatically sets the copy ratio and makes copies of the images so that 
they fit on the selected paper.

Important • Confirm that the orientation of the document and the [Original Orientation] setting of the 

[Layout Adjustment] screen are the same.

Note

• When [Auto %] of [Reduce/Enlarge] is cancelled (a new copy ratio is selected), image loss 

may occur depending on the document image size of the document. 

• When Image Shift is set, shift is executed on the whole document. For this reason, image 

loss at the edge of the original may occur depending on the document image size of the 
document.

• When Edge Erase is set, it is carried out for each document page.

• Select an item other than [Auto Paper] for the paper tray of [Paper Supply] on the [Copy] 

screen.

1

Select [Multiple-Up].

2

Select any item.

„

1 Page Up

Multiple Up is not applied.

„

2 Pages Up

Two document sheets are copied together onto a single sheet of paper.

„

4 Pages Up

Four document sheets can be copied together onto a single sheet of paper.

„

8 Pages Up

Eight document sheets can be copied together onto a single sheet of paper.

„

Reading Order

You can select the layout for copying the documents together.

Poster (Making Enlarged Copies Spread over Multiple Sheets)

An enlarged copy of a document can be made spread over multiple sheets.

This feature allows you to create a large poster by pasting together the copies spread 
over multiple sheets. Copied sheets are provided with a paste margin so that they can 
be pasted together. The paste margin is fixed to 10 mm.

Important • Confirm that the orientation of the document and the [Original Orientation] setting of the 

[Layout Adjustment] screen are the same.

Note

• This feature is not supported by a 

document feeder.

1

Select [Poster].

2

Select any item.

„

No Posters

No enlarged copies are made.

Summary of Contents for DocuCentre-II 6000















































































































































































































Reviews: