Fuji Xerox ApeosPort-II C2200, Function Manual

Page: 114 / 137

10 System Settings
112
Sy
st
em
S
e
ttin
gs
10
Differences in Copy Mode Settings
This section describes differences from System Settings written in the User Guide.
For differences in the setting values, refer to "System Settings Menu List" (P.87).
General Settings Tab - Features Allocation
You can set the features appearing in the third and fourth columns from the left of the
[General Settings] screen. By setting the most commonly used features, you can avoid
extra operations such as selecting tabs.
Note • Do not assign a feature to more than 1 buttons.
1
Select [General Settings Tab -
Features Allocation].
2
Select the number of features
displayed on the [General Settings]
screen.
3
From the buttons appearing on
[Frequently Used Features], select
the position where you want to
allocate a feature.
„ 5 Features
When you select [5 Features], no feature can be allocated.
„ 7 Features
Allows you to set the features appearing in the fourth column from the left of the
[General Settings] screen. Up to 3 features can be allocated.
„ 10 Features
Allows you to set the features appearing in the third and fourth columns from the left of
the [General Settings] screen. Up to 6 features can be allocated.
„ Frequently Used Features
The position of the buttons shows the position of the buttons in the [Basic Copy] screen.
4
Select [Features] or [Settings].
5
Select the feature to be displayed,
and select [Save].
6
Repeat steps 3 to 5 as required.
7
Press [Save].
„ Features
The feature buttons in tabs other
than the [General Settings] screen can be displayed on the [General Settings] screen.
„ Settings
The setting value of the feature buttons in tabs other than the [General Settings] screen
can be displayed on the [General Settings] screen, and selected directly on the screen.