manualshive.com logo in svg

Frymaster BIELA14-T Series, Installation, Operation And Maintenance Manual

Share
Download
Frymaster BIELA14-T Series Installation, Operation And Maintenance Manual Download Page 65

5-17 

               DISPLAY 

ACTION 

VAT AND PAN DRY? 

25.

 

Ensure the vat and filter pan are completely dry.  
 

 

DANGER 

Ensure that the frypot and filter pan are completely dry and 
free of water before filling with oil.  Failure to do so will cause 
splattering of hot liquid when the oil is heated to cooking 
temperature.  

 

INSERT PAN 

26.

 

 Reinstall screen, filter pad, hold down ring and crumb basket 
removed in step 15.  Insert the filter pan. 

FILL VAT FROM BULK? 

27.

 

Press the 

√

 (check) button to continue. If the X button is selected, the 

user returns to the filtration menu.  

START FILLING? 

PRESS AND HOLD 

28.

 

Press and hold the button to fill the vat.  The bulk oil refill pump uses a 
momentary switch. It only pumps as long as the switch is depressed. 
 

RELEASE BUTTON WHEN FULL 

29.

 

Release the button when the vat is filled to the lower fill line. 
 

CONTINUE FILLING? 

30.

 

Press the 

√

 (check) button to continue 

fi

lling. Otherwise press the X 

button once the vat is full to exit and return to OFF. 

 

31.

 

The controller switches off. 

 
 

Summary of Contents for BIELA14-T Series



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands