3–4
3.3.3 Routine Oil Changes
When the oil reservoir level is low, a yellow
indicator is activated (see Figure 3) and displays
TOP OFF OIL EMPTY. Press the check button to
clear the screen. Once the reservoir is refilled
and/or replaced, press and hold the orange reset
button next to the oil reservoir until the yellow
indicator is no longer illuminated. If using solid
shortening see Appendices B and C for
instructions.
Figure 3
Yellow indicator that oil reservoir is empty.
1. Open the cabinet and slide the JIB from the
cabinet (see Figure 4).
Figure 4
2. Remove the cap and pour any remaining oil in the container
into all fry vats equally (see Figure 5).
Figure 5
3. With the replacement jug upright remove the
cap and foil seal (see Figure 6).
Figure 6
4. Put the tube in the new full container (see Figure 7).
Figure 7
5. Slide the JIB onto the shelf inside the
fryer cabinet (as seen in Figure 4).
6. Press the JIB reset switch to turn the
JIB yellow indicator on the M4000
controller off (see Figure
WARNING
Do not add HOT or USED
oil to a JIB.
Figure 8
3.3.4 Bulk or Front Dispose Oil Systems
Instructions for installing and using bulk oil systems are found in Appendix A
located at the rear of this manual.
Summary of Contents for BIELA14-T Series
Page 23: ...4 6 4 5 Basic Operation ...
Page 24: ...4 7 4 6 Cooking ...
