Frymaster BIELA14-T Series Installation, Operation And Maintenance Manual Download Page 58

5-10 

5.3.7  Fill Vat from Drain (Filter) Pan 

 

The drain to pan function drains the oil from the vat to the filter pan. 

 

               DISPLAY 

ACTION 

 

1.

 

The fryer 

MUST

 be OFF. 

 

2.

 

Press the filtration menu button 

  

 

 

3.

 

Select LEFT VAT or RIGHT VAT for split vats. 

  

 

4.

 

Press the down arrow. 

 

5.

 

Select FILL VAT FROM DRAIN PAN. 

FILL VAT FROM DRAIN PAN? 

6.

 

Press the 

 (check) button to continue. If the X button is selected, the 

controller goes to OFF. If no pan is detected, the controller displays 
INSERT PAN until the pan is detected.   

FILLING 7.

 

No action is required while the vat is filling. 

IS VAT FULL? 

8.

 

Press the X button to run the pump again if the oil level is below the 
top oil level full line. Press the 

 (check) button once the vat is full and 

to return to OFF.  

 

9.

 

The controller switches off. 

 

5.3.8  Fill Vat from Bulk 

 

The drain to pan function drains the oil from the vat to the filter pan. 

 

               DISPLAY 

ACTION 

 

1.

 

The fryer 

MUST

 be OFF. 

 

2.

 

Press the filtration menu button 

Summary of Contents for BIELA14-T Series



















































































Reviews: