manualshive.com logo in svg

Frymaster BIELA14-T Series, Installation, Operation And Maintenance Manual

Share
Download
Frymaster BIELA14-T Series Installation, Operation And Maintenance Manual Download Page 46

4-29 

               DISPLAY 

ACTION 

10.

 

GATEWAY SOFTWARE VERSION 

11.

 

GATEWAY IP ADDRESS 

12.

 

GATEWAY LINK QUALITY 

13.

 

GATEWAY SIGNAL STRENGTH AND NOISE 

 

 

6.

 

Press the up arrow to scroll 
up; the back button to return 
to menu or the home button 
to exit. 

 

4.14.8

 

  Reset Usage Statistics 

The reset function resets all usage data in the usage statistics. 

 

               DISPLAY 

ACTION 

 

1.

 

Press the Information button. 

 

2.

 

Press the down arrow button. 

 

3.

 

Press Reset Usage button. 

4 3 2 1 

4.

 

Enter 

4321

 

 

5.

 

Press the 

√

 (check) button. 

ALL USAGE DATA HAS BEEN RESET

 

6.

 

Press the 

√

 (check) button. 

 

 

7.

 

Press the up arrow to scroll up; the back button to 
return to menu or the home button to exit.  

 

 

4.14.9   Fresh Oil Statistics 

The fresh oil statistics function is used to view information on the current fresh oil. 

               DISPLAY 

ACTION 

  

 

 

1.

 

Press the Information button. 

 

2.

 

Press the down arrow button. 

 

3.

 

Press the Fresh Oil button. 

1.

 

NUMBER OF COOKS SINCE LAST DISPOSE 

2.

 

DISPOSE COUNT COOKS SINCE LAST RESET 

3.

 

FRESH OIL COUNTER RESET DATE 

4.

 

FRESH OIL COUNTER 

 

 

4.

 

Press the back button to return to menu or the home 
button to exit.  

 
 

Summary of Contents for BIELA14-T Series



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands