5-12
DISPLAY
ACTION
5.
Select OIL PAN TO WASTE.
OIL PAN TO WASTE?
6.
Press the
√
(check) button to continue. If the X button is selected, the
user returns to the filtration menu. If no pan is detected, the controller
displays INSERT PAN until the pan is detected.
BULK TANK FULL?
7.
Press the
√
(check) button to acknowledge and call the bulk oil waste
provider. The display returns to OFF.
OPEN DISPOSE VALVE
8.
Open the left cabinet door and unlock the valve if necessary. Pull the
dispose valve completely forward to start disposal.
DISPOSING
9.
No action is required while the pump transfers the waste oil from the
pan to the bulk oil waste tanks for four (4) minutes.
REMOVE PAN
10.
Carefully pull the filter pan from the fryer.
DANGER
Open the filter pan slowly to avoid splashing of hot oil that
may cause severe burns, slipping and falling.
IS PAN EMPTY?
11.
If the filter pan is empty press the
√
(check) button. If the pan is not
empty, press the X button and return to step 9.
INSERT PAN
12.
Insert the filter pan.
CLOSE DISPOSE VALVE
13.
Close the dispose valve by pushing the valve handle toward the rear of
the fryer until it stops. Relock the valve if required by your manager.
14.
The controller switches off.
5.3.10 Deep Clean (Boil-Out) for Non-Bulk Oil Systems
The deep clean mode is used to remove carbonized oil from the frypot.
NOTE:
Refer to Kay Chemical “Fryer Deep Clean Procedure” instructions to clean the LOV™ fryer.
DISPLAY
ACTION
1.
The fryer
MUST
be OFF.
Summary of Contents for BIELA14-T Series
Page 23: ...4 6 4 5 Basic Operation ...
Page 24: ...4 7 4 6 Cooking ...
