![Frymaster BIELA14-T Series Installation, Operation And Maintenance Manual Download Page 64](http://html.mh-extra.com/html/frymaster/biela14-t-series/biela14-t-series_installation-operation-and-maintenance-manual_2340403064.webp)
5-16
DISPLAY
ACTION
OPEN DISPOSE VALVE
11.
Open the left cabinet door and unlock the valve if necessary. Pull the
dispose valve completely forward to start disposal.
DISPOSING
12.
No action is required while the pump transfers the waste oil from the
pan to the bulk oil waste tanks for four (4) minutes.
REMOVE PAN
13.
Carefully pull the filter pan from the fryer.
DANGER
Open the filter pan slowly to avoid splashing of hot oil that may
cause severe burns, slipping and falling.
IS PAN EMPTY?
14.
If the filter pan is empty press the
√
(check) button. If the pan is not
empty, press the X button and return to step 9.
INSERT PAN
15.
Insert the filter pan.
CLOSE DISPOSE VALVE
16.
Close the dispose valve by pushing the valve handle toward the rear of
the fryer until it stops. Relock the valve if required by your manager.
SOLUTION ADDED?
17.
Fill the vat to be cleaned with water and cleaning solution mix. Press
the
√
(check) button to start the cleaning procedure. Refer to the
Deep Clean maintenance requirement card and Kay Chemical
provided instructions “Fryer Deep Clean Procedure” for McDonald’s
deep clean (boil-out) procedure.
DEEP CLEANING
18.
Scrub the vat and then let the solution soak while the vat heats to 195°
F (91° C) for one hour.
CLEAN DONE
19.
After one hour, the heater shuts off. Press the
√
(check)
button to silence the alarm.
IS SOLUTION REMOVED?
20.
Remove the filter pan and remove crumb basket, hold-down ring, filter
pad and screen. Replace empty filter pan in fryer. Refer to Kay
Chemical provided instructions “Fryer Deep Clean Procedure” for
instructions on how to remove the cleaning solution.
Press the
√
(check) button once the cleaning solution is removed.
DANGER
Allow deep-clean (boil-out) solution to cool to 100°F (38°C)
before disposal, otherwise hot liquid can cause injury.
SCRUB VAT COMPLETE?
21.
Press the
√
(check) button once the vat is scrubbed.
DRAINING IN PROGRESS
22.
No action is required while the vat drains the small amount of residual
solution left in the vat.
RINSE COMPLETE?
23.
Rinse excess solution from vat. Press the
√
(check) button when the
vat is completely rinsed.
REMOVE PAN
24.
Remove the filter pan and dump the contents of the filter pan. Rinse
the pan of any residual solution.
Summary of Contents for BIELA14-T Series
Page 23: ...4 6 4 5 Basic Operation ...
Page 24: ...4 7 4 6 Cooking ...