6
Intended Use
The device must only be used for its intended purpose.
Utilization for any other purpose, or in any other manner, shall be deemed to be not in ac
-
cordance with the intended purpose. The manufacturer accepts no liability for any damage
resulting from improper use.
Intended use also means:
-
Reading and adhering to all instructions in the Operating Instructions
-
Reading and adhering to all safety instructions and danger notices
-
Carrying out all the specified inspection and maintenance work
The device is designed for operation in industry and business. The manufacturer shall not
be liable for any damage resulting from use in a living area.
The manufacturer shall also not be liable for faulty or incorrect work results.
Environmental
Conditions
Operation or storage of the device outside the stipulated area will be deemed as not in ac
-
cordance with the intended purpose. The manufacturer accepts no liability for any damage
resulting from improper use.
Temperature range of the ambient air:
-
During operation: -10°C to +40°C (14°F to 104°F)
-
During transport and storage: -20°C to +55°C (-4°F to 131°F)
Relative humidity:
-
Up to 50% at 40°C (104°F)
-
Up to 90% at 20°C (68°F)
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6561 ft. 8.16 in.)
Obligations of the
Operating Com
-
pany
The operating company must only allow persons to work with the device if they
-
Are familiar with the basic occupational safety and accident prevention regulations
and are trained in handling the device
-
Have read and understood these Operating Instructions, especially the section "Safe
-
ty Rules," and have confirmed this with their signature
-
Are trained according to the requirements for the work results
The safety-conscious work of the personnel must be checked regularly.
Obligations of
Personnel
All persons who are assigned to work with the device must do the following before begin
-
ning the work:
-
Follow the basic regulations for occupational safety and accident prevention
-
Read these Operating Instructions, especially the section "Safety Rules," and confirm
that they have understood and will follow them by signing
Before leaving the workplace, ensure that no personal injury or property damage can occur
in one's absence.
Particular Hazard
Areas
Do not linger in the operating area of the robot.
Always integrate the device into a higher-level safety system in a secured area.
