56
The torch bodies are defined by screwing in
the cylinder head screws A, B, and C diffe
-
rently
(Hexagon socket size 2.5 mm).
Symbols:
Cylinder head screw is screwed in
(Cylinder head screw present)
IMPORTANT!
-
Combination without screwed-in cylin
-
der head screws is not permitted.
-
During operation, data must always be
retrieved from all 3 sensors. For exam
-
ple, if data is only retrieved from one
sensor, a torch body with 2 or 3 screws
may also be located in the rack.
NOTE!
When using the coding ring:
► The sensor fitted as standard on the torch-body rack must be readjusted, otherwise a
collision will occur.
► 2 additional torch body sensors (42,0002,0444) are required per rack.
Adjusting the sensor fitted as standard:
Remove the torch body from the torch-body rack.
Loosen the front jam nut
size 19 mm
Loosen the rear jam nut
size 19 mm
Move sensor back
A B C
(1)
(2)
(3)
(4)
(5)
(6)
(7)
2
3
4
1
2
3
4
