29
EN
-U
S
Before installation and initial operation
Safety
Please follow the safety rules below when carrying out all the tasks described in the "In
-
stallation and Commissioning" chapter.
WARNING!
Incorrect operation and incorrectly performed work can cause serious injury and
damage to property.
► All work listed in these Operating Instructions may only be performed by trained spe
-
cialist personnel.
► All functions described in these Operating Instructions may only be used by trained
specialist personnel.
► All work and functions specified must only be performed and used once these Operat
-
ing Instructions have been fully read and understood.
► All work and functions specified must only be performed once all of the Operating In
-
structions for the system components, in particular the safety rules, have been fully
read and understood.
WARNING!
Machines that start automatically can cause serious injury and damage to property.
► In addition to these Operating Instructions, observe the safety rules of the robot man
-
ufacturer and welding system manufacturer.
► For your personal safety, make sure that all protective measures have been taken in
the robot's operating area and remain in effect while you are in this area.
WARNING!
Danger of serious injuries caused by the robot arm.
► Ensure that no third parties are located in the operating area of the robot while any
work is taking place.
WARNING!
Work that is performed incorrectly can cause serious injury and damage to property.
Before beginning work:
► Switch the power switch on the power source to - O -
► Disconnect the power source from the grid
► Ensure that the power source remains disconnected from the grid until all work is com
-
plete
CAUTION!
Risk of injury from hot system components.
► Before starting work, allow all hot system components to cool to room temperature,
such as:
Torch body
Torch body coupling
