Fronius IG Plus 100 V-1, Operating Instructions Manual

Page: 33 / 168

31
g
Fronius IG Plus Installation
Attaching the wall
bracket
Lifting the Fro-
nius IG Plus Fronius recommends using a commercially-available vacuum lifting pad for flat surfaces to
lift the connection area and power stage set.
IMPORTANT
IMPORTANT! Depending on the surface, different dowels and screws may be required for
installing the wall bracket. Therefore, these dowels and screws are not part of the scope of
supply for the inverter. The system installer is responsible for selecting the proper dowels
and screws.
NOTE! The Fronius IG Plus should only be installed upright on the wall.
"click" "click"
1
1
1
min. 50 mm
min. 2 in.
2
1
1
7
3
5
4
6
(*)
2
IMPORTANT! Attach the wall bracket so that the display marking (*) on the wall bracket is
at eye level.
2 2
3
4
1
6
5
3
2
6 x
4
6
7
1
5
2 3
4