Fronius IG Plus 100 V-1, Operating Instructions Manual

Page: 111 / 168

109
g
OFF SET
Offset is an amount of energy (in Wh, kWh, or MWh) that can be added to the lifetime total
energy output of the inverter to give it a ‘head start.’
CALI.
Preset correction value, so that the data shown on the inverter display corresponds to the
calibrated data shown on the electric meter
IG no.
Number setting (address) of the inverter in
a setup comprising multiple solar inverters
linked together
DAT COM
Indicates status of data transmission, func-
tion test or activates and resets various op-
tion (e.g., Fronius Signal Card, Fronius
Personal Display Card, Fronius Interface
Card, Fronius TAC Card, etc.)
OK COM / ERROR COM
Displays data communication available via Solar Net or an error that occurred in data com-
munication
Examples of options:
SIGCD TEST
Function test for the Fronius Signal Card option
Setting range OFF SET / CALI.
Unit Wh / kWh / MWh
Setting range 5-digit + k... / M...
1 kWh = 1000 Wh
1 MWh = 1000000 Wh
Factory setting 0
Unit %
Setting range -5.0 - +5.0 in increments of 0.1
Factory setting 0
Unit -
Setting range 01 - 99 (100th inverter = 00)
Factory setting 1
IMPORTANT! Each inverter must be assigned its own address when connecting several
inverters in a data communications system.
Setting range Displays OK COM or ERROR COM;
SIGCD TEST / PDCD RST / IFCD RST / TAC ON