1.1 Functional description
The Froling discharge system “Torsion arm agitator (TGR)“ consists of:
1
Mitre gear
2
Articulated arms with torsion springs
3
Trough channel, closed
4
Trough channel, open
5
Geared motor
6
Intermediate plate for connecting the raised floor to the stirring head
7
Rotary agitator
When the store is filled, the rotary agitator arms are positioned at the agitator head,
reducing the resistance during system operation due to the smaller diameter.
If fuel is requested using the boiler controller, the system starts and the material is
loosened using the pre-tensioned rotary agitator arms, and fed to the trough of the
dosing screw. The dosing screw feeds the material to the transfer position, where it
falls through the burn back protection system (burn back flap/rotary valve) into the
stoker screw of the boiler that is positioned below.
General
1
Functional description
Installation Instructions TGR 110/150/200 | M1390116_en
5
