Rotary agitator with combined drive system
After working in the store:
❒ Turn on the boiler’s main switch
❒ Turn on the main switch on the expansion switch cabinet (if installed)
❒ Switch on main switch at feed system module
❒ Switch on the boiler by tapping “Boiler on” at the mode icon
❒ For the highest possible heat consumption
➥ the storage tank must be able to store enough heat
❒ Wait until the rotary agitator arms / spring blades are touching the head of the
rotary agitator (approx. 2 revolutions)
❒ Add the rest of the fuel
5.3.3 Blowing in fuel for a partially emptied store with rotary agitator
If there is still sufficient fuel in the store (the head of the rotary agitator is completely
covered with fuel and the rotary agitator arms are not extended), the store can be filled
as follows:
❒ Switch off the boiler by pressing the standby key and allow to cool down for at
least two hours
❒ Close all openings to the store to seal out dust
❒ Blow the fuel into the store
Operating the system
5
Filling the store with fuel
Installation Instructions TGR 110/150/200 | M1390116_en
35
