❒ Use suitable tools (e.g. screwdriver and hammer) to push the hinge far enough to‐
ward the rear so that when the door is closed, there is slight resistance at a gap of
approx. 2-3 cm
➥ Caution: the hinge must be aligned in the same way at the top and bottom!
❒ Tighten the nuts at the top and the bottom on the side of the door with the stop
NOTICE! When the door stops have been changed, you must check the settings and
seal of the door.
⇨ See "Setting and checking the seal on the doors" [page 26]
Converting the fuel loading door
❒ Remove the radiation plate together with the seal
4
Assembly
Before Installation
24
Froeling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.at
All manuals and user guides at all-guides.com
