Once the material in the boiler has burnt down, the boiler can be used in accordance
with the operating instructions ("Operating the system" section).
NOTICE
If condensation escapes during the initial heat-up phase, this does not indicate a
fault.
❒ Tip: If this occurs, clean up using a cleaning rag.
Boiler with Lambda control
❒ Open the insulated door and the fuel loading door
❒ Fill the fuel loading chamber for initial start-up and heat up
NOTICE! See boiler operating instructions
Boiler with manual controller
0%
100%
50%
+ -
❒ Set the manual controller for the air flap as shown in the table below
NOTICE! The information below only applies to split wood and not for round timber,
square timber etc.
Start-up
5
Initial startup
Installation Instructions S3 Turbo | M1080813_en
65
All manuals and user guides at all-guides.com
