❒ Undo the retainer of the hinge pin at the top and bottom door hinge
➥ You can use two screwdrivers to gently bend the retainer plate out to loosen it
❒ Take out the top and bottom hinge pins and remove the combustion chamber door
❒ Remove the locking plate and hinge
➥ Loosen the nuts (M8) with Allen wrench (13 mm)
❒ Remount the locking plate and hinge with spacer washers and nuts on the other
side
➥ Only partially tighten the nuts
NOTICE! When changing the stop of the fuel loading door, at this point, the fuel load‐
ing door must be converted.
⇨ See "Converting the fuel loading door" [page 24]
❒ Rotate the door and rehang it with the stop on the other side
➥ Secure at the top and bottom with the hinge pins
❒ Refit the retainers to the top and bottom hinge pins
➥ To do so, you can use two screwdrivers
Assembly
4
Before Installation
Installation Instructions S3 Turbo | M1080813_en
23
All manuals and user guides at all-guides.com
