5 | Servicing the system
32
B1300122_en | Operating instructions Lambdamat LM 800-1000
5 Servicing the system
5.1 General information on servicing
DANGER
When working on electrical components:
Risk of electrocution!
When work is carried out on electrical components:
r
Always have work carried out by a qualified electrician
r
Observe the applicable standards and regulations
Ä
Work must not be carried out on electrical components by unauthorised persons
DANGER
Risk of falling when working at a height
Therefore:
r
Implement appropriate measures in accordance with the applicable national industrial
safety guidelines to protect against the risk of falling (e.g. ladders, platforms, etc.)
WARNING
Inspection and cleaning work on a system which is operational:
Risk of serious injuries from automatic startup of the system and severe burns
from hot parts and the flue gas pipe!
When working on the system:
r
always wear protective gloves
r
only operate the boiler using the handles provided
r
switch off the boiler by tapping “Boiler off” at the mode icon
Ä
The boiler follows the shutdown procedure and switches to “Switched off OFF“
status
r
switch off the main switch and take precautions to prevent accidental switching on
r
allow the boiler to cool off for at least 1 hour
r
once all of the tasks have been completed, turn the main switch back on and switch
the boiler on in the desired mode
WARNING
Incorrect inspection and cleaning:
Incorrect or insufficient inspection and cleaning of the boiler can cause serious
faults in combustion (e.g. spontaneous combustion of carbonisation gases / flash
fires) and this can lead to serious accidents and damage!
Take the following precautions:
r
Clean the boiler following the instructions in the instruction manual. Follow the boiler
operating instructions.
