Servicing the system | 5
B1300122_en | Operating instructions Lambdamat LM 800-1000
57
5.7.2 Start emissions measurement
r
Activate the “Chimney-sweep mode” icon
r
Select the desired time from the menu:
immediately
r
Specify the type of measurement (
nominal load
/
partial load
)
Ä
The flue gas temperature and residual oxygen content should have
stabilised approximately 20 minutes after activation
Ä
The display will indicate that the boiler is ready for measurement as soon
as all the conditions for the measurement are fulfilled
5.8 Maintenance agreement / Customer service
NOTICE! We recommend a yearly inspection by Froling customer services or an
authorised partner (third party maintenance).
Regular maintenance and servicing by a heating specialist will ensure a long, trouble-free
service life for your heating system. It will ensure that your system stays environmentally-
friendly and operates efficiently and cost-effectively.
In the course of this maintenance the entire system is inspected and optimised,
particularly regulation and control of the boiler. The emission measurement carried out
can also be used to draw conclusions about the combustion performance of the boiler.
For this reason, FROLING offers a service agreement, which optimises operating safety.
Please see the details in the accompanying guarantee certificate.
Your Froling customer service office will also be happy to advise you.
NOTICE
All national and regional regulations relating to regular testing of the system must be
observed. Please be advised that, in Austria, commercial systems with a rated heat
output of 50 kW or more must be regularly tested at yearly intervals in accordance with
the Heating Plant Regulations (Feuerungsanlagen-Verordnung).
