Safety | 2
B1300122_en | Operating instructions Lambdamat LM 800-1000
15
2.6 Residual risks
WARNING
When touching hot surfaces:
Severe burns are possible on hot surfaces and the flue gas pipe!
When work is carried out on the boiler:
r
Shut down the boiler according to procedure (“Switched off OFF” operating status)
and allow it to cool down
r
Protective gloves must usually be worn for work on the boiler, and it should only be
operated using the handles provided
r
Insulate the flue gas pipes and do not touch them during operation
WARNING
Opening the door to the combustion or burning chamber, or the cleaning door or lids
during operation
may result in injury or damage or flue gas generation!
Therefore:
r
Do not open any doors or lids while the boiler is in operation!
WARNING
If non-permitted fuel types are used:
Non-standard fuels can cause serious faults in combustion (e.g. spontaneous
combustion of carbonisation gases / flash fires) which can lead to serious
accidents!
Take the following precautions:
r
Only use fuels specified in the "Permitted fuels" section of these operating
instructions.
WARNING
Inspection and cleaning work on a system which is operational:
Risk of serious injuries from automatic startup of the system and severe burns
from hot parts and the flue gas pipe!
When working on the system:
r
always wear protective gloves
r
only operate the boiler using the handles provided
r
switch off the boiler by tapping “Boiler off” at the mode icon
Ä
The boiler follows the shutdown procedure and switches to “Switched off OFF“
status
r
switch off the main switch and take precautions to prevent accidental switching on
r
allow the boiler to cool off for at least 1 hour
r
once all of the tasks have been completed, turn the main switch back on and switch
the boiler on in the desired mode