Frigor Tstat Series, Manual

Page: 29 / 56

Tstat Series
- 29 -
7.
8.
9.
10.
Now click the “Discover” button, circled green in the picture above. T3000 will actively search your computer’s ports
and
fi nd the Tstat6 that is connected. Once it has fi nished it will show a pop up window, shown below, with the Tstat6’s
information shown. Note that the information on yours will be different. Close this window.
If we want to change the Modbus ID of the unit, we click “Tool” >> “Change Modbus ID”, change the ID and press “OK”.
We can see “Tool” is located in the menu, highlighted by a yellow circle in the screenshot below.
With referencing to the diagram above, click on “Network Points”, circled in red, to get a general overview of what your
Tstat6 unit is connected to. If you want to change the units of temperature between celsius and fahrenheit click on the
“Con
fi guration” icon, circled in black. The ‘parameter’ window will pop up and where the arrow points to is where you can
select either celsius or fahrenheit.
Now we need to set up our external devices in the inputs menu. Click the icon that is circled in the picture below. Notice
that inputs 1 and 3 have diferent values than the rest of the inputs.