Frigor Tstat Series, Manual

Page: 32 / 56

Tstat Series
- 32 -
Register of Tstat6
Address Register Name Register and Description
0 MODBUS_SERIALNUMBER_LOWORD Serial Number - 4 byte value. Read-only
1 RESERVED Serial Number - 4 byte value. Read-only
2 MODBUS_SERIALNUMBER_HIWORD Serial Number - 4 byte value. Read-only
3 RESERVED Serial Number - 4 byte value. Read-only
4 MODBUS_VERSION_NUMBER_LO Software Version – 2 byte value. Read-only
5 MODBUS_VERSION_NUMBER_HI Software Version – 2 byte value. Read-only
6 MODBUS_ADDRESS ADDRESS. Modbus device address
7 MODBUS_PRODUCT_MODEL
Product Model. This is a read-only register that is used by the microcon-
troller to determine the product
8 MODBUS_HARDWARE_REV
"Hardware Revision. This is a read-only register that is used by
the microcontroller to determine the hardware rev"
9 MODBUS_PIC_VERSION PIC fi rmware version
10 MODBUS_HUM_PIC_VERSION PIC version of Humidity module
11 MODBUS_ADDRESS_PLUG_N_PLAY
"PLUG_N_PLAY_ADDRESS, ‘plug n play’ address, used by the network
master to resolve address con
fl icts. See VC code for algorithms"
12 RESERVED Spare
13 RESERVED Spare
14 MODBUS_CUSTOM_ADDRESS Base address selection.0 = Protocol address,1 = PLC address.
15 MODBUS_BASE_ADDRESS
Firmware Update Register, used to show the status of fi rmware updates.
Writing 143 sets the con fi g back to out of the box except for Modbus ID and
baud rate. Write 159 to fi x the current con fi g as the user defaults, this is done
automatically by T3000 any time a con fi g fi le is loaded. Writing 175 resets the
unit back to the user defaults.
16 MODBUS_UPDATE_STATUS Spare
17 MODBUS_UPDATE_PTR_HI Spare
18 MODBUS_UPDATE_PTR_LO Spare
19 MODBUS_SCRATCHPAD_ADDRESS
Hardware Options Register, starting with LSB: Bit0=Clock present or not, Bit1
= Humidity present or not, Bit2 = C02 Sensor, Bit3=CO sensor, Bit4 = Motion
Sensor
20 MODBUS_HARDWARE_INFORMATION PANID for zigbee devices
21 RESERVED Device type of zigbee. 0 means coordinator , 1 means router
22 RESERVED Channel of Zigbee, default channel is channel 13, 0x00002000
23 RESERVED Channel of Zigbee, default channel is channel 13, 0x00002000
24 RESERVED Zigbee module software revision
25 RESERVED Zigbee extended address(MAC address)
26 RESERVED Zigbee extended address(MAC address)
27 RESERVED Zigbee extended address(MAC address)
28 RESERVED Zigbee extended address(MAC address)
29 RESERVED Zigbee extended address(MAC address)
30 RESERVED Zigbee extended address(MAC address)
31 RESERVED Zigbee extended address(MAC address)
32 RESERVED Zigbee extended address(MAC address)
33 RESERVED Set 1 to reboot zigbee module
34 RESERVED Security key
35 RESERVED Security key