Frigor Tstat Series, Manual

Page: 34 / 56

Tstat Series
- 34 -
Address Register Name Register and Description
79 RESERVED Blank, for future use
80 RESERVED Blank, for future use
81 RESERVED Blank, for future use
82 RESERVED Blank, for future use
83 RESERVED Blank, for future use
84 RESERVED Blank, for future use
85 RESERVED Blank, for future use
86 RESERVED Blank, for future use
87 RESERVED Blank, for future use
88 RESERVED Blank, for future use
89 RESERVED Blank, for future use
90 RESERVED Blank, for future use
91 RESERVED Blank, for future use
92 RESERVED Blank, for future use
93 RESERVED Blank, for future use
94 RESERVED Blank, for future use
95 RESERVED Blank, for future use
96 RESERVED Blank, for future use
97 RESERVED Blank, for future use
98 RESERVED Blank, for future use
99 RESERVED Blank, for future use
100 RESERVED Blank, for future use
101 MODBUS_COOL_HEAT_MODE
COOL_HEAT_MODE, heating or cooling mode. 0=none, 1=cooling, 2=heat-
ing.
102 MODBUS_MODE_OPERATION
MODE_OPERATION, heating or cooling state: 0-7 = coasting, cooling 1,2,3,
heating 1,2,3
103 MODBUS_SEQUENCE
SEQUENCE , 0 = internal test sequence, outputs slowly cycle on/off or ramp
up & down. 1 = normal, operation according to the output tables.
104 MODBUS_DEGC_OR_F DEGC_OR_F, engineering units, Deg C = 0, Deg F = 1
105 MODBUS_FAN_MODE
numer of fan speeds or system modes,.. Single speed = 1 up to three speed
fan = 3
106 MODBUS_POWERUP_MODE
"POWER UP_MODE, mode of operation on power up. 0 = power off,
1 = power up in on mode, 2 = last value (default), 3 = auto mode."
107 MODBUS_AUTO_ONLY
"AUTO_ONLY , enables or disables manual mode. 0 = Manual Fan Modes
1-x Allowed
(depending on R122 value, 1 = Auto Mode Only, 2 = DDC mode,the user can
not change setpoint and fan speed from keypad."
108 MODBUS_FACTORY_DEFAULTS
Write 1 to register 108 - resets the unit to latest factory defaults. (Same as
writing Writing 143 to register 16)