Frigor Tstat Series, Manual

Page: 17 / 56

Tstat Series
- 17 -
Advanced Menu Item Details
1. Normal State.
2. LCD screen display.
The Tstat6 series thermostats have several advanced menu items which
can be adjusted in the
fi eld to suit the application and tune the operation
of the thermostat. Generally speaking, all the parameters are set up at the
factory on an order-by-order basis and will give satisfactory results out of
the box. There are four keys, here show the instructions.
Last menu item
Next menu item
Increase value
Decrease value
1. Now you are in the normal state, when you press or , it will show the set point screen. Press or , to
increase or decrease the set point value. Waiting three seconds will con
fi rm the setting. When the current temp value is
under the set point, it will show the heating symbol. When the current temp value is above the set point value, it will show
the cooling symbol.
3. Now you are in the normal mode, press both and at the same time and hold for several seconds. It will
switch into the menu mode. Press or to scroll through the menu options such as ‘Add’, ‘CAL’, ‘BAUDRATE’,
‘UNITS’ and many others. To change the values at a particular menu, press or . The chosen value will be stored
automatically.
To change the unit’s address scroll through the menu until you reach ‘Add’. Press or to increase or decrease the
unit’s address from 1 to 254.
To change the baudrate, locate ‘baudrate’ within the menu and use and to choose 19200 or 9600.