background image

1

Installation and Advanced Programming Instructions

HP8211-1RJ and HP8321-1RJ Heat Pump Thermostats

These instructions are intended for installation and first time set up of the thermostat.
For day to day use please refer to the User Instruction Sheet.

Unpacking and installing the thermostat

1. Thermostat location

2. Unpacking the thermostat

Note: a wall plate (code no:
087N8000WP) is available to
cover a wider area when
retrofitting.

Contents

- Ordering Details for Series 8000 Product Range _________________________ 1

- Unpacking and installing the thermostat ________________________________ 1

- Setting the DIP switches (optional) ____________________________________ 2

- Attaching the thermostat to the wallplate ________________________________ 2

- Wiring Instructions _________________________________________________ 3

- Using remote sensors (optional) _____________________________________ 3

- Programming the event times (setbacks) and temperatures ________________ 4

- Summary table of 

A

dvanced

P

rograming

M

ode (APM) options ______________ 5

- Detailed description of 

A

dvanced

P

rogramming

M

ode (APM) options ________ 6

- Trouble shooting guide _____________________________________________ 8

- Thermostat specification table _______________________________________ 8

- Contact information ________________________________________________ 8

Ordering Details for Series 8000 Product Range

Number of Stages & Application

Model

Code Number

1 Heat 1 Cool for heat/cool systems (no occupancy relay)

HC8111-1

087N6807NA

1 Heat 1 Cool for heat/cool or heat pump systems

HC8111-1RJ

087N7224NA

2 Heat 2 Cool for heat/cool systems

HC8221-1J

087N6939NA

2 Heat 2 Cool for heat/cool systems (battery operated)

HC8220-1J

087N6940NA

2 Heat 1 Cool for heat pump systems

HP8211-1RJ

087N6959NA

3 Heat 2 Cool for heat pump systems

HP8321-1RJ

087N6963NA

Accessories

Remote room sensor

TS2/2

087N728500

Duct mounting sensor

TS5

087N681200

Outdoor sensor

TS6

087N681300

Optional wall plate for 8000 Series thermostats

1810

087N8000WP

Summary of Contents for HP8211-1RJ









Reviews: