24
Stand/Update
: 01.2019
5.2.4
“ID Data” submenu
The
“ID Data”
submenu presents data that you can select and that must be
assigned directly to the pending fusion: Order Number, Fusion Joint Number,
and GPS Data. These data cannot be entered in this submenu. When this
function is “activated”, the inputs are prompted only after the fusion barcode
has been read in. These data can also be entered directly in the “ID Data” menu
before each fusion operation (see Section 5.5.1).
5.2.4.1
Commission Number
The
“Commission Number”
function lets you activate or deactivate work with
order numbers. With Commission Number activated, the ID Data menu (ID Data
key) lets you select a Commission Number or enter a new number either
manually or in the form of a barcode. The selected order number then appears
in the display’s main window.
5.2.4.2
Seam number
The
“Seam number”
function lets you decide whether an additional seam
number can be entered for a fusion operation.
5.2.4.3
GPS Data
The
“GPS Data”
function lets you decide whether the coordinates/location of
the fusion fitting can be entered manually.
INFORMATION
A corresponding device is needed to determine the GPS data!
5.3
“Data” submenu
INFORMATION
The “Data” submenu is first activated and hence shown on the display when
documentation has been activated and the first data record saved!
The function key in the main menu opens the submenu
“Data”
.
