22
Stand/Update
: 01.2019
5.2.1
“Operator pass” submenu
INFORMATION
The “Operator pass” submenu is first acticated and hence shown on the
display when a operator pass is read in for the first time (and documentation
is activated)!
INFORMATION
Personal data are handled in compliance with the EU GDPR
If, for example, the operator’s plaintext name is encrypted as user code, this will
also be transferred as such to the FRIAMAT fusion log for further processing! The
specifications under the EU GDPR must be followed with respect to personal data!
After a operator pass has been read in for the first time, all fusions performed
from this time on will be stored under the code for this operator pass. The
FRIAMAT prime eco is reconfigured accordingly when another operator pass is
read in.
After reading in the operator pass, the system opens the
“ID Data”
submenu
(see also Section 5.2.4). The direction keys scroll through the settings activated
on the FRIAMAT prime eco.
The operator pass can be used to lock the FRIAMAT prime eco as protection
against unauthorised use. A locked FRIAMAT prime eco shows on its display
the request
“!!! PLEASE ENTER VALID OPERATOR PASS !!!”
.
Locking the device:
1. Again read in the current operator pass.
2. Press the function (confirmation) key to acknowledge the prompt
“LOCK
UNIT?”
. Alternatively, you can abort the procedure at the CANCEL function
key.
3. The FRIAMAT prime eco is also locked automatically when a operator pass
has been read in and the date changes, i.e. the FRIAMAT prime eco is
locked on the next day. In both of these cases (manual or automatic
locking), the display shows the prompt
“!!! PLEASE ENTER VALID
OPERATOR PASS !!!”
.
Unlocking the device:
1. Read in a operator pass.
2. The valid operator pass appears on the display and must be confirmed with
the function (confirmation) key.
