29
Stand/Update
: 01.2019
5.4.3
Info Data: Info Text, Comment, Subcontractor
After the fusion barcode has been read in, the prompt “START” appears on the
display.
1. Press the (Info Data) function key.
2. Use the direction keys to select “INFO TEXT”, “COMMENT”, and/or
“Subcontractor”.
3. Press the (Input/Emergency Input) function key.
4. Enter each of the numbers from the first to the last using the direction keys
on the virtual keypad. When finished, press OK.
5. Press the (Confirm) function key to save the entered numbers, the (Cancel)
function key to abort the input, or the (Backspace) function key to delete
preceding numbers
6. Press the (OK) function key or the STOP key to close the menu.
5.4.4
Scraper Tool
When the data are being entered to start fusion, the prompt
“PIPE
PROCESSED?
” is followed by the prompt to enter a scraper tool code.
When the scraper tool is equipped with a barcode, this can be read in. The data
are then assigned to the fusion in the log.
Also the (Input/Emergency Input) function key can be used to enter the scraper
tool code manually on the virtual keypad.
