Fresenius Medical Care AquaA, Instructions For Use Manual

Page: 97 / 240

Chapter 4: Operation
Fresenius Medical Care AquaA IFU-EN-US 06B-2021 97
4.11.3.3 Programming the switching programs

Changing the autostop time once
To change the autostop time only once, follow the description in (see
chapter 4.5.8 on page 53).

Programming Switching program in 7 steps:
Step 1 To make changes in the switching program, the check box Switching
program deactivated must be checked.
Step 2 Enter the minute for the start.
Step 3 Enter the hour for the start.
Step 4 Enter the minute for the stop.
Step 5 Enter the hour for the stop.
Step 6 Select the weekdays on which the switching program is to be activated.
Step 7 To complete changes in the switching program, check the Switching
program activated check box.

Programming example for extension to the next day:
Dialysis start Monday at 05:30 a.m.
Dialysis end Tuesday at 06:10 a.m.
Tip
Switching program activated
Switching program deactivated
Note
The hours for the start and stop time must not match.
If the hour for start and stop are the same, the switching program does
not start (e.g., switching program 1: 5:15 to 5:10).
This also applies when using two switching programs with day overflow.
Tip
Switching program activated
Switching program deactivated