Fresenius Medical Care AquaA, Instructions For Use Manual

Page: 226 / 240

Chapter 15: Appendix
226 Fresenius Medical Care AquaA IFU-EN-US 06B-2021
Operating modes and functions
A Quick guide (see chapter 4.5
on page 48)
– Select program ( STANDBY , SUPPLY , RINSE )
– Press and hold the button for 3 seconds
IFU

B Operating programs (see
chapter 4.4 on page 45), (see
chapter 4.5 on page 48), (see
chapter 4.6 on page 54), (see
chapter 4.8 on page 60),
– STANDBY
– SUPPLY
– RINSE (Cleaning as well as the sub-operating modes Rinse AquaA and Rinse water
pretreatment system)
– EMERGENCY MODE
IFU

C Status menu
(no password required) (see
chapter 4.10.2 on page 72)
– Messages:
Current messages
Confirm messages
– Report
– Start, Stop:
Switching program settings for Supply and Rinse
Changing the autostop time once
– System information:
Configuration and system values
– Operating data (current operating data)
IFU

D Emergency mode (see
chapter 4.8 on page 60)
– No emergency supply with soft water
– Dialysis water conductivity and temperature in the break tank are monitored
– Activating the emergency mode:
Turn the reverse osmosis system and any options off using the main power switch
(OFF)
Turn the AquaA emergency mode switch counter-clockwise or clockwise
Turn the AquaA reverse osmosis system on using the main power switch (ON)
The second pump can be switched on by pressing this switch–even if pump 1 fails to
switch on.
– Deactivating the emergency mode:
Set the main power switch of the AquaA to the OFF position
Set the emergency switch to its center position
Return the main power switch of the AquaA reverse osmosis system and options to
the ON position
IFU

E AquaA2 emergency mode
(see chapter 4.8.4 on
page 64)
– No emergency supply with soft water
– Dialysis water conductivity is monitored
– Activating the emergency mode:
– Turn the AquaA reverse osmosis system and options off using the main power
switch (OFF)
– Change the water supply path to Emergency mode 2
– Turn the AquaA2 emergency mode switch clockwise
– Turn the AquaA2 reverse osmosis system on using the main power switch (ON)
– The second pump can be switched on by pressing this switch–even if pump P1s
fails to switch on
– Deactivating the emergency mode:
– Turn the AquaA2 reverse osmosis system off using the main power switch
(OFF)
– Change the water supply path to Standard operation 1
– Set the emergency switch to its center position
– Return the main power switch of the AquaA , AquaA2 and options to the ON
position. Before restoring dialysis operation, a disinfection (chemical or
membrane heat disinfection) must be performed.
IFU

Alarms
A Visual indicator (see
chapter 3.3.1 on page 39)
– Red and flashing–an alarm or a malfunction has occurred and has not yet been
confirmed
– Yellow and flashing–a warning has occurred and has not yet been confirmed
– Yellow–Disinfection or service in progress
– Green–
SUPPLY mode is active
– Green and flashing–the system is in the process of switching to the SUPPLY mode
IFU

B Error messages (see
chapter 5.4 on page 112)
– Are displayed directly if an alarm occurs
– Refer to Chapter 5 "Alarms" in the Instructions for Use
– Refer to Chapter 2 "Addresses" (Water Technology hotline) IFU

Training subjects Filed in
