Franke Flair, Service Manual

Page: 9 / 202

TD-100340.doc
6
4.12. Thermal link 45
4.12.1. Mode of operation 45
4.12.2 Replacing the thermal link for coffee/hot water and steam 45
4.12.3. Technical data 45
4.14. Coffee/hot water and steam temperature sensors 46
4.14.1. Mode of operation 46
4.14.2. Replacing the temperature sensor for coffee/hot water and steam 46
4.15. Pressure control valve 47
4.15.1. Mode of operation 47
4.15.2. Replacing the pressure control valve for coffee/hot water circuit 47
4.15.3. Technical data 47
4.15.4. Replacing the overpressure valve for steam circuit 48
4.15.5. Mode of operation 48
4.15.6. Technical data 48
4.16. Solenoid valves (No. 2-6) 49
4.16.1.Replacing solenoid valves 49
4.16.2.Technical data 49
4.16.3.Replacing the electromagnetic coil for the drainage valve 49
4.16.4.Technical data 49
4.17. Coffee dispenser micro switch 50
4.17.2. Replacing the micro switch 50
5. Control system subassembly / Wiring electrical / Fluid systems diagram 51
5.1. Front panel control system 51
5.1.1. Mode of operation 51
5.1.2. Replacing the front panel control system 51
5.2. Power print board 53
5.2.1. Mode of operation 53
5.2.2. Replacing fuse 53
5.2.3. Replacing the power print board 53
5.2.4. Technical data 53
5.3. Transformer 54
5.3.2. Replacing the transformer 54
5.3.3. Technical data 54
5.4. Interference eliminator 55
5.4.1. Mode of operation 55
5.4.2. Replacing the interference eliminator 55