Franke Flair, Service Manual

Page: 160 / 202

Franke Kaffeemaschinen AG
TD-100470.doc
22 / 32
46 E046 chipcard read CRC error main ID block.
47 E047 chipcard read CRC error only shadow ID block.
48 E048 chipcard read CRC error in two data blocks
(main block + mirrored).
49 E049 chipcard read CRC error in a data block (mirrored).
50 E050 chipcard read Error reading the header information.
Either the contacts of the chip or of the reader are
soiled or the card is defective. It may be necessary to
re-initialise.
51 E051 chipcard ident Invalid manufacturer’s code. (RID code invalid.)
Card cannot be used on the Evolution.
52 E052 chipcard ident Invalid manufacturer’s code. (PIX code invalid.)
Card cannot be used on the Evolution.
53 E053 chipcard ident Card type is not supported by Evolution.
54 E054 chipcard ident Error reading the data block. Either the contacts of the
chip or of the reader are soiled or the card is defective.
It may be necessary to re-initialise.
55 E055 chipcard ident The installation number is incorrect and is for a
different device.
57 E057 chipcard write Card has become unusable because no error counter
bits are available (max. 8).
58 E058 chipcard write A card with an incorrect write-protection code is in the
reader. Warning! After 8 attempts to read the card, it
will become irrevocably unreadable (error 57).
59 E059 chipcard write A timeout occurred while writing to the card. Either the
contacts of the chip or of the reader are soiled or the
card is defective. It may be necessary to re-initialise.