5. - FPM Boljevac does not guarantee the characteristics and safety of the trailers of other
manufacturers.
CARE AND MAINTENANCE OF THE TRAILER
1. Lubrication
On the trailer, the following parts are lubricated:
- Drive shaft with LUMA 2 lubricant, repeatedly during the season, and after two years completely
replace all the lubrication. Occasionally lubricate the grooved portion of the output shaft;
- Lubricate the ore of the trailer through a lubricant placed on the upper side of the ore with LUMA 2
lubricant, twice a year;
- The telescopic part of the shaft shaft should be lubricated several times during the year;
- Lubricate the joints with LUMA 2 lubricant using the decalemate of the grease, the lubricants should be
placed on the joints. The lubrication time is usually after 10 operating hours.
- Regularly check the oil level in the gear unit using the meter;
- The oil change in the gearbox is carried out after two years, and the oil HIPOL-B SAE 90 is used;
- Make the first oil change in the differential after 50 - 60 hours. The following changes are made after 2
years. For this purpose, use HIPOL-B SAE 90 oil.
2. General maintenance:
- Regularly tighten all nuts and bolts, especially when the trailer is new, and especially pay attention to
the nuts and bolts that secure the wheels, differential and gearbox;
- The tire pressure of both trailers must be the same and it is 2.25 · 1010 Pa;
- Do not allow tires to come into contact with oil, fuel or lubricating grease, acids, anti-corrosive agents,
etc. because their effect on the tire is detrimental;
- When the trailer has been out of use for a long period of time, remove it under the roof and lift it to
suitable pads), which will relieve the tires.
WORKING WITH THE TRAILE
The trailer is designed so that it can load the maximum speed achieved by the batcher under full load.
Connected exclusively to the cultivator.
The trailer can be driven with the drive shaft turned on or off.
The trailer box is 1950 x 1450 x 300, and it is constructed in such a way that the load can be shaken.
Load capacity is 1000 kg. For the transport of bulky cargo (hay, bundle, etc.), there are grid sides and
tubes for the extension of the platform, the installation of which is easy and simple.
NOTE: Do not use the hammock sides of the trailer to transport the material, for example, wood,
stone, and the like.
ROTARY MOWER WITH RIGID BLADES
For working with rotary mower with rigid
blades, the following connecting devices are
required:
a) - 1 drive part of the rotary mower
art. no. FPM 802 230
b) - 1 pair of working bodies - rotor with tin,
art. no. FPM 802 235
c) - 1 pair of extra weights for wheels,
art. no. 501 93 111
d) - 1 claw set,
art. no. 501 93 141 (depending on
land
conditions)
Figure 30
Summary of Contents for 408 D
Page 42: ...FPM 805 229 FPM 805 160 FPM 807 167 strana 42...
Page 65: ...strana 43...
