7. Connect the potato machine to the body of the universal connector.
WORK
1 - 5. As with regular ploughing (page 32 - 33)
1. During the first meters of working with the machine, adjust the working depth of the potato
machine.
2. For turning at the ends, using the wheel block lever (see description on page 18, Pic. 11).
AFTER FINISHING WORK
1. Disassemble in the order opposite to that when mounting.
2. Install the cover on the rear of the machine (on the flange of the output shaft).
WORKING WITH A CULTIVATOR WITH A RIGID HOE
(for cultivating soil until sowing and planting)
For this purpose, you need the following connecting devices:
a) - One cultivator with rigid hoes (for processing
land until sowing and planting)
art. number FPM 803 247
b) - Universal plug for the cultivator
art. number FPM 804 228
c) - 1 pair of extra weights for the wheels
art. number 501 93 111
d) - 1 pair of claw sets
art. number 501 93 141 (depending on the land conditions).
INSTALLATION
1 - 6. The same mounting procedure as with regular ploughing (see description on page 32 -
33).
7. Connect the cultivator with rigid hoes to the body of the universal connector.
WORK
1 - 5. As with regular ploughing (pages 32 - 33).
6. During the first few meters of work, a cultivator with rigid hoes (for cultivating soil till
sowing and
planting) to the required working depth, and in addition to adjust the lateral range.
AFTER FINISHING WORK WITH THE CULTIVATOR
1. Dismantling shall be done in the order opposite to that of the assembly.
2. Place the cover on the rear of the machine (on the flange of the output shaft).
WORKING WITH THE MOWER
For this purpose, you need the following connecting
devices:
a) - The drive mechanism of the mower
art. number IMT 804 231
b) - 1 cutting machine with setting guides,
Summary of Contents for 408 D
Page 42: ...FPM 805 229 FPM 805 160 FPM 807 167 strana 42...
Page 65: ...strana 43...
