1.- If you do not use the motocultivator for a
longer period, clean it thoroughly.
2.- The machine should be washed after
cleaning.
3.- Release the oil from the gearbox and the
engine and then fill it with clean oil to the
proper level.
4.- Remove all excess oil carefully with a
cloth.
5.- Replace all damaged or worn
parts.
6.- Tighten all screws and nuts on
machine.
7.- Clean rusted surfaces and bare spots
and shade them with protective paint.
8.- Lift the machine to the wooden stand,
making sure that the rubber wheels do not
lie on the ground. (tires will become
unusable in the shortest possible time
when they are without air, and under
load).
NOTE: MOTOCULTIVATOR SHOULD NOT BE STORED:
- IN HUMID SPACE
- IN PLACES WHERE MINERAL FERTILIZERS ARE STORED
- IN STABLES OR ADDITIONAL ROOMS
- IN ALL THESE AREAS, THE MACHINE WILL CORRODE STRONGLY
PREPARATION OF THE MACHINE FOR WORK
(in spring when field works begin)
1.
2.
3.
4.
Lubricate all moving parts with oil and technical
lubricant.
Check and clean (if necessary):
- the gas tank
- all the fuel lines through the purifier
fuel to fuel injection pump
Do not forget to release air from the fuel supply
(if necessary).
Check the air pressure in the tires.
DRIVING WITH A TRAILER WITH DRIVE WHEELS
1
3
Summary of Contents for 408 D
Page 42: ...FPM 805 229 FPM 805 160 FPM 807 167 strana 42...
Page 65: ...strana 43...
