NOTE
ELECTRIC INSTALLATION SCHEME FOR MOTOCULTIVATOR FPM 414 DE WITH ELECTRIC
POWER MACHINE:
1. Mass
2. Battery
3. Electric starter
4. Voltage regulator
5. Oil pressure gauge
6. Alternator 7. Headlamps
8. Main switch with key (Contact lock)
9. Start switch
10. Battery charging indicator light
11. Oil pressure indicator lamp
12. Heat insurers
The numbers entered in
are installed at the ends of the conductor.
MOVING AND DRIVING
- Hold the safety handle (see Pic. 24) and at the same time tighten the clutch lever (clutch)
Picture 24
-
Turn on the desired transfer rate
-
Coupling handle - Clutch should be slowly
released while simultaneously adding gas.
-
The motorcycle or the engine will work as long
as you hold the safety lever with your hand,
which is the working position of the safety
handle.
DANGER: You must hold the safety lever during operation only by hand. Any binding of the
handle is strictly forbidden.
Summary of Contents for 408 D
Page 42: ...FPM 805 229 FPM 805 160 FPM 807 167 strana 42...
Page 65: ...strana 43...
