50
IMPORTANT NOTE
Verify that the X2S and X2S remote are set to operate on the same channel prior to updating
the sound list. If they are not on the same channel, you will have difficulty in getting the list
to update.
12.
Creating FOXCAST Sequence Files
This section will provide you with detailed information on creating and installing FOXCAST
sequence files in your X2S digital game caller.
12-1
Creating FOXCAST Sequences Manually
This process requires some basic computer operations experience. If you are not very
experienced with computers, it is recommended that you seek help prior to performing any of
the following steps.
A FOXCAST sequence file is a simple text based file that contains unique instructions to guide
your X2S through a stand. These instructions include commands to change the sound, change
the volume level, enter a passage of silence, and so forth. Here is a chart showing all of the
various command possibilities:
Instruction
Value
Description
S
0 – 999
Denotes numerical value of sound on unit
V
0 – 40
Denotes numerical value of volume level
P
1 - 99999
Denotes pause value in seconds (approx.)
B
0-19
FOXPITCH activation and parameter
M
0 – 4
FOXMOTION and speed parameter
D
1 or 0
1= activate decoy, 0= deactivate decoy
J
n/a
Denotes Jukebox Mode for this FOXCAST File
R
n/a
Denotes Repeat Mode for this FOXCAST File
Q
n/a
Denotes Single Play Mode for this FOXCAST File
A typical FOXCAST sequence file may look something similar to the following example:
Example FOXCAST Sequence File Layout
V 20
S 15 4
P 90
V 35
S 22
V 30
S 20 3
Q
The previous example is interpreted as follows:
Summary of Contents for X2S Series
Page 1: ......
Page 59: ...59 Notes...
