37
Configuring Display Timeout:
1.
Access the Display/Power menu and select “Disp Timeout”
2.
Use the scroll buttons to cycle through the available time spans.
3.
When set to the desired time, push “Play/Select” to lock it in.
IMPORTANT NOTE
When your display times-out, you can push the power button a single time to wake it back
up to ensure that no functions are initiated. For example, if you were to use a preset button
or mute button in attempt to wake the remote up, you will be performing the function of
that button at the same time. A single press of the power button will wake it up without
causing any changes in operation.
7-5
Auto Off
After being idle for an established period of time, the X2S remote control will completely power
down. When this happens, the remote must be powered back on like normal. There are five
different time settings that you can use for configuring the auto power off: 30 minutes, 45
minutes, 1 hour, 2 hours, and 4 hours.
Configuring Auto Off:
1.
Access the Display/Power menu and select “Auto Off”
2.
Use the scroll buttons to cycle through the available time spans.
3.
When set to the desired time, push “Play/Select” to lock it in.
8.
Date / Time(r)
The Date / Time(r) menu provides access to the date and time configuration, stand timer
configuration, and the stand alarm.
8-1
Stand Timer & Timer Reset
When activated, the far right indicator on the bottom status line will begin keeping time that
has elapsed since the X2S remote has been powered on. The timer displays as: “MMM:SS” (“M”
stands for minutes and “S” for seconds). The stand timer begins tracking time as soon as the
X2S remote is turned on.
Turning on the Stand Timer:
1.
Access the Date/Time(r) menu and select “Stand Timer”
2.
Use the scroll buttons to change between off and on.
3.
When set to the desired position, push “Play/Select” to lock it in.
Resetting the Stand Timer:
Summary of Contents for X2S Series
Page 1: ......
Page 59: ...59 Notes...
