42
9-9
Restore Defaults
To reset your X2S remote control back to factory defaults, use this option. Please be aware that
restoring factory defaults will result in loss of your presets/favorites, sound list, categories, and
all FOXDATA information.
Restoring Factory Defaults:
1.
Access the TX1000 Settings menu and select “Restore Defaults”.
2.
A confirmation screen is displayed asking you if you are sure. To proceed, select “Yes”,
otherwise, “No” will return you to the menu.
3.
Once the reset is complete, the remote will be back to factory default conditions.
10.
X2S Remote USB Operation
The X2S remote control features a mini USB port located inside of the battery compartment,
just above the batteries. In order to connect the remote to a computer, you will need to obtain
a mini USB type A/B cable.
IMPORTANT NOTE
Before connecting the X2S remote to a computer, be sure that it has fresh batteries installed.
The X2S remote must be powered on while connected to a computer. If the device loses
power while connected to a computer during a write-mode, there is a possibility of
corruption of the file system. Make sure the batteries are fresh to prevent any damage from
occurring.
Connecting the X2S Remote to a Computer:
1.
Connect the USB cable from the jack on the X2S remote to a USB port in the
computer.
2.
Power on the X2S remote. The screen should activate and show “USB Active” instead
of the sound screen.
3.
Your operating system will then detect the device and take the necessary steps to
make it accessible for you. Windows users will see a new drive appear named
“TX1000”. Mac users will see a new icon appear on their desktop called “TX1000”.
IMPORTANT NOTE
Depending upon your computer setup and operating system, the exact details of what will
happen when you connect the device may vary slightly. In general, the operating system will
detect that a piece of hardware has been detected. From there, you should receive some
sort of visual or audible notification that something has been plugged in.
When the X2S remote is connected to a computer, you can browse through the device just as
you would any other USB storage device. Inside of the file system, you should encounter two
files. These files are:
Summary of Contents for X2S Series
Page 1: ......
Page 59: ...59 Notes...
