Foxpro X2S Series, Instruction Manual

Page: 12 / 60

12
2. Quick Start Guide
The X2S user manual is rather lengthy, covering all aspects of the X2S and remote control. We
realize that some of you may wish to jump directly into basic operations, such as playing sounds
manually, remotely, and using presets. This is a very brief overview and it is strongly
recommended that you read this manual entirely in order to fully understand all capabilities of
the system.
2-1 X2S Remote Setup
After installing batteries or changing batteries in the X2S remote, it is recommended that you
make it a routine to take a moment to setup the date and time settings. This section will explain
these setup configurations.
Setting the Clock:
1. Access the Date/Time(r) menu and select “Time”
2. Use the scroll buttons to set the current time.
3. Push “Play/Select” to lock it in.
The clock can be displayed in either the standard 12-hour format or 24-hour format (military
time).
Configuring Time Format:
1. Access the Date/Time(r) menu and select “Time Format”
2. Use the scroll buttons to select either 12 or 24-hour time format.
3. Push “Play/Select” to lock in the setting.
The bottom status line of the X2S display can show either the current time or the stand timer.
The stand timer will only be displayed if it is turned on—otherwise, the clock will show the
current time.
The X2S remote will keep track of the current date in order to properly render moon phases.
This needs to be setup when you first start using the X2S remote.
IMPORTANT NOTE
The X2S remote control features a moon phase indicator. In order to display the correct
moon phase, it is imperative that you enter the correct date. Otherwise, the displayed
information may not be correct.
Setting the Date:
1. Access the Date/Time(r) menu and select “Date”