![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269216.webp)
Foundry Configuration Guide for the FESX, FSX, and FWSX
10 - 12
© Foundry Networks, Inc.
December 2005
The [<slotnum/> applies to chassis devices only.
Table 10.5 describes the information displayed by the
show trunk
command.
Table 10.5: CLI Trunk Group Information
This Field...
Displays...
Trunk ID
The trunk group number. The software numbers the groups in the
display to make the display easy to use.
HW Trunk ID
The trunk ID.
Duplex
The mode of the port, which can be one of the following:
•
None – The link on the primary trunk port is down.
•
Full – The primary port is running in full-duplex.
•
Half – The primary port is running in half-duplex.
Note
: This field and the following fields apply only to operational trunk
groups.
Speed
The speed set for the port. The value can be one of the following:
•
None – The link on the primary trunk port is down.
•
10 – The port speed is 10 Mbps.
•
100 – The port speed is 100 Mbps.
•
IG – The port speed is 1000 Mbps.
Tag
Indicates whether the ports have 802.1Q VLAN tagging. The value
can be Yes or No.
Priority
Indicates the Quality of Service (QoS) priority of the ports. The
priority can be a value from 0 – 7.
Active Ports
The number of ports in the trunk group that are currently active.
Ports
The ports in the trunk group.
Link_Status
The link status or each port in the trunk group.
LACP_Status
For more information about this feature, see the section “Displaying
and Determining the Status of Aggregate Links” on page 10-22.
•
Ready - The port is functioning normally in the trunk group and is
able to transmit and receive LACP packets.
•
Expired - The time has expired (as determined by timeout values)
and the port has shut down because the port on the other side of
the link has stopped transmitting packets.
•
Down - The port’s physical link is down.
Load Sharing
The number of traffic flows currently being load balanced on the trunk
ports. All traffic exchanged within the flow is forwarded on the same
trunk port. For information about trunk load sharing, see “Trunk
Group Load Sharing” on page 10-6.
Summary of Contents for FastIron Edge Switch X424
